Release Notes

Avaya - Proprietary

This document contains proprietary information of Avaya and is not to be disclosed or used except in accordance with

applicable agreements

CID # 152845 Page 9 of 18

Avaya B5800 Branch Gateway Rls 6.2 Engineering Release Note

Password with the corresponding password for “craft” user. Verify Synchronization / B5800

Branch Gateway is successful and the configuration can be opened from the B5800 Branch

Gateway / System Configuration window.

Note: If the Service Password and/or the Service Login for a B5800 Branch Gateway are changed,

the preferred method of adding a B5800 Managed Element is using the New Element or Bulk Import

feature. If the B5800 Branch Gateway is being discovered by System Manager using the subnet

discovery method, once data is available in Manage Elements, bulk import in edit mode can be used

to update all login/passwords at once.

2.4..6 Configuring BCM50/BCM450 through CS 1000 tandem H.323 trunks in a

B5800 Branch Gateway network

In a network where the B5800 Branch Gateway is connected via a CS1000 tandem node to a BCM

which in turn is using H.323 trunks to connect to the NRS/CS 1000 if it is working over an H.323 trunk,

H.245 tunnelling must be enabled on the BCM.

Topology: B5800 Branch Gateway --- SIP --- Session Manager --- SIP --- CS 1000 (tandem node) ---

H.323 --- NRS --- H.323 --- BCM (enable H.245 tunnelling)