User's Manual

Avaya Branch Gateway Manager 10.0 Page 851
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Appendix: SMDR:
12.1 SMDR Fields
The SMDR output contains the following fields. Note that time values are rounded up to the nearest second.
1.Call Start
Call start time in the format YYYY/MM/DD HH:MM:SS. For all transferred call segment this is the time the call was
initiated, so each segment of the call has the same call start time.
2.Connected Time
Duration of the connected part of the call in HH:MM:SS format. This does not include ringing, held and parked time. A
lost or failed call will have a duration of 00:00:00. The total duration of a record is calculated as Connected Time +
Ring Time + Hold Time + Park Time.
3.Ring Time
Duration of the ring part of the call in seconds.
· For inbound calls this represents the interval between the call arriving at the switch and it being answered, not the
time it rang at an individual extension.
· For outbound calls, this indicates the interval between the call being initiated and being answered at the remote
end if supported by the trunk type. Analog trunks are not able to detect remote answer and therefore cannot
provide a ring duration for outbound calls.
4.Caller
The callers' number. If the call was originated at an extension, this will be that extension number. If the call originated
externally, this will be the CLI of the caller if available, otherwise blank.
5.Direction
Direction of the call – I for Inbound, O for outbound. Internal calls are represented as O for outbound. This field can be
used in conjunction with Is_Internal below to determine if the call is internal, external outbound or external inbound.
6.Called Number
This is the number called by the system. For a call that is transferred this field shows the original called number, not
the number of the party who transferred the call.
· Internal calls: The extension, group or short code called.
· Inbound calls: The target extension number for the call.
· Outbound calls: The dialed digits.
· Voice Mail: Calls to a user's own voicemail mailbox.
7.Dialled Number
For internal calls and outbound calls, this is identical to the Called Number above. For inbound calls, this is the DDI of
the incoming caller.
8.Account
The last account code attached to the call. Note: System account codes may contain alphanumeric characters.
9.Is Internal
0 or 1, denoting whether both parties on the call are internal or external (1 being an internal call). Calls to destinations
on other switches in a network are indicated as internal.
Direction
Is Internal
Call Type
I
0
Incoming external call.
O
1
Internal call.
O
0
Outgoing external call.
10.Call ID
This is a number starting from 1,000,000 and incremented by 1 for each unique call. If the call has generates several
SMDR records, each record will have the same Call ID. Note that the Call ID used is restarted from 1,000,000 if the
system is restarted.
11.Continuation
1 if there is a further record for this call id, 0 otherwise.
12.Party1Device
The device 1 number. This is usually the call initiator though in some scenarios such as conferences this may vary. If
an extension/hunt group is involved in the call its details will have priority over a trunk. That includes remote network
destinations.
Type
Party Device
Party Name
Internal Number
E<extension number>
<name>
Voicemail
V<9500 + channel number>
VM Channel <channel number>
Conference
V<1><conference number>+<channel
number>
CO Channel <conference number.channel number>