User's Manual

Avaya Branch Gateway Manager 10.0 Page 84
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
3.5.3 Services Settings
This tab is accessible when Service is selected in the navigation pane. It shows details of the services that the
system runs to which service users can communicate.
· Name
The name of the service. This is a fixed value for indication purposes only.
· Host System
This field shows the system's name. This is a fixed value for indication purposes only.
· Service Port
This is the port on which the system listens for attempts to access the service. The routing of traffic to this port may
need to be enabled on firewalls and network devices between the service users and the system. The base port (TCP or
HTTP) for each service is offset by a fixed amount from the ports set in System Settings.
Service
Method
Port Used
Default
Port
Service
Security
Level
Configuration
This service is used for access to control
unit configuration settings by the Branch
Gateway Manager application. If set to a
mode other than secure, the Branch
Gateway Manager's Security preferences
also need to changed to match.
Unsecure
Base TCP
Port
50804
Secure
Medium.
Secure
" plus 1.
50805
System Status
Interface
This service is used by connections to the
System Status Application application. The
default setting is Disabled. When disabled,
the service is not available on any port.
Unsecure
" plus 4.
50808
Disabled.
Security
Administration
This service is used for access to control
unit security settings by the Branch
Gateway Manager applications.
Unsecure
" plus 8.
50812
Secure
Medium.
Secure
" plus 9.
50813
Enhanced TSPI
The default setting is Disabled. When
disabled, the service is not available on any
port.
Unsecure
" plus 10.
50814
Disabled.
Web Services
This service is used for access to control
unit configuration settings by web
applications. The default setting is Secure,
Medium. You cannot select Unsecure +
secure for this service. If set to Disabled
, the service is not available on any port.
Unsecure
" plus 14.
50818
Secure
Medium.
Secure
" plus 15.
50819
HTTP
The HTTP service affects all HTTP
connections provided by the system.
Changing its setting will affect applications
other than just the DECT R4. The default
Service Security Level is Secure +
Unsecure, meaning both http and https
can be used.
· Unsecure = HTTP port 80 available.
This is used for phone files, embedded
file manager, system file upgrade, one-X
Portal directory services, DECT R4
provisioning, IPO softphone
provisioning.
Unsecure
Base HTTP
Port
80
Secure Low.
Secure
–
443
104