User's Manual

Avaya Branch Gateway Manager 10.0 Page 799
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Appendix: Locale Settings: Locale Defaults
Disconnect
Tone
The tone used when disconnect indication is provided to an extension.
Disconnect
Method
Indicates whether the locale uses Busy tone disconnect or disconnect clear operation on analog
trunks.
Display
Language
The default language used for messages sent to extensions.
Feature Phone
Clearing
The locale specific action applied to digital and IP phones when the far end of a call disconnects. This
action can be overridden by the Disconnect Tone option on the System | Telephony | Telephony
tab.
Voicemail
Truncation
Time
On analog trunks, call disconnection can occur though busy tone detection. When such calls go to
voicemail to be recorded or leave a message, when the call ends the system indicates to the voicemail
system how much to remove from the end of the recording in order to remove the busy tone
segment. For some systems it may be necessary to override the default if analog call recordings are
being clipped or include busy tone. That can be done by adding a VM_TRUNCATE_TIME= setting
with the required value in the range 0 to 7 seconds.
Default
Currency
Used for Advice of Charge operation where supported on ISDN lines.
Default Time
Zone
This value is used to set the default time offset and daylight saving settings for a system when using
SNTP to obtain the UTC time value.
159
715