User's Manual

Avaya Branch Gateway Manager 10.0 Page 792
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Analog Remote Access Example
Configuration for a connection from an analog modem call is very similar to the ISDN example. However the system must
be able to answer modem calls. This can be done in the following ways;
· Analog Trunk Modem Mode
On systems with an analog trunk card in the control unit, the first analog trunk can be set to answer V.32 modem calls.
This is done by checking the Modem Enabled option on the analog line settings or using the default short code
*9000* to toggle this service on or off.
· There is no longer a need to switch the card's modem port on/off. The trunk card's V32 modem function can be
accessed simply by routing a modem call to the RAS service's extension number. The modem call does not
have to use the first analog trunk, instead the port remains available for voice calls.
· When using an analog modem, the Bearer Capability of the incoming call route used should be Any Voice.
346