User's Manual

Avaya Branch Gateway Manager 10.0 Page 791
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Data Routing: Examples
ISDN Remote Access Example
1. Create a User
The required details are:
· In the User tab:
Enter a Name and Password. The system is case sensitive. Remember to take care with passwords as this is a
remote access link into your network.
· In the Dial In tab:
Ensure that Dial In On is ticked. The Firewall Profile and Time Profile are optional.
2. Create a RAS Record
· In the RAS tab:
Enter the same name as the user that you created earlier. Again, remember this is case sensitive.
3. Create an Incoming Call Route
· Set the Bearer Capability to Any Data.
· In the Destination drop-down list, select the RAS record created above.
· The values that you enter for any of the other fields will depend on whether the remote user will be calling in on a
particular line, number or from a set ICLID.
4.Is a Return IP Route Needed ?
Go to Step 5.
5. Create a IP Route (Optional)
If the remote user has an IP address that is not in the same domain as the system, then an IP Route is needed for
return data. This is not necessary if the remote user's dial-up connection method is set to 'Obtain an IP Address
Automatically' and the system's DHCP mode is set to Server or Dial In.
· Enter the IP Address and IP Mask of the remote system.
· In the Destination drop-down list select the RAS record created above.