User's Manual

Avaya Branch Gateway Manager 10.0 Page 739
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Telephone Features: Message Waiting Indication
9.21 Ring Tones
Ring tones can be defined in the following terms:
· Distinctive Ringing - Inside, Outside and Ringback
A distinctive ring tone can be given for each of the different call types: an internal call, an external call and a ringback
calls (voicemail calls, ringback when free calls, calls returning from park, hold or transfer).
· The distinctive ringing patterns used for most non-analog phones are as follows:
· Internal Call: Repeated single-ring.
· External Call: Repeated double-ring.
· Ringback Call: Repeated single-ring followed by two short rings.
· For analog extensions, the ringing pattern used for each call type can be set through the system configuration in
Branch Gateway Manager. This is done using the settings on System | Telephony | Tones & Music and or
User | Telephony | Call Settings tabs.
· For non-analog extension the ringing pattern used for each call type by the system is not configurable.
· Personalized Ringing
This term refers to control of the ringing sound through the individual phones. For non-analog phones, while the
distinctive ringing patterns cannot be changed, the ringer sound and tone may be personalized depending on the
phone's own options. Refer to the appropriate telephone user guide.
Analog Phone Ringing Patterns
For analog phone users, the distinctive ringing pattern used for each call type can be adjusted. From the System |
Telephony | Tones & Music tab, the default ring tone for each call type can be configured. The setting for an
individual user associated with the analog extension can be altered from the system default through the User |
Telephony | Call Settings tab.
Note that changing the pattern for users associated with fax and modem device extensions may cause those devices to
not recognize and answer calls.
The selectable ringing patterns are:
· RingNormal
This pattern varies to match the Locale set in the System | System tab. This is the default for external calls.
· RingType1: 1s ring, 2s off, etc. This is the default for internal calls.
· RingType2: 0.25s ring, 0.25s off, 0.25s ring, 0.25s off, 0.25s ring, 1.75s off, etc. This is the default for ringback
calls.
· RingType3: 0.4s ring, 0.8s off, …
· RingType4: 2s ring, 4s off, …
· RingType5: 2s ring, 2s off, …
· RingType6: 0.945s ring, 4.5s off, …
· RingType7: 0.25s ring, 0.24 off, 0.25 ring, 2.25 off, …
· RingType8: 1s ring, 3s off, …
· RingType9: 1s ring, 4s off, …
· RingType0: Same as RingNormal for the United Kingdom locale.
· Default Ring: Shown on the User | Telephony | Call Setting tab. Indicates follow the settings on the
System | Telephony | Tones & Music tab.
163
281
163
281
281
163