User's Manual

Avaya Branch Gateway Manager 10.0 Page 735
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Telephone Features: Call Pickup
9.17 Call Waiting
Call waiting allows a user who is already on a call to be made aware of a second call waiting to be answered.
User Call Waiting
Call waiting is primarily a feature for analog extension users. The user hears a call waiting tone and depending on the
phone type, information about the new caller may be displayed. The call waiting tone varies according to locale .
For Avaya feature phones with multiple call appearance buttons, call waiting settings are ignored as additional calls are
indicated on a call appearance button if available.
To answer a call waiting, either end the current call or put the current call on hold, and then answer the new call. Hold
can then be used to move between the calls.
Call waiting for a user can be enabled through the system configuration (User | Telephony | Call Settings | Call Waiting
On ) and through programmable phone buttons.
Call waiting can also be controlled using short codes. The following default short codes are available when using Call
Waiting.
· *15 - Call Waiting On
Enables call waiting for the user.
· *16 - Call Waiting Off
Disables call waiting for the user.
· *26 - Clear Call and Answer Call Waiting
Clear the current call and pick up the waiting call.
Hunt Group Call Waiting
Call waiting can also be provided for hunt group calls. The hunt group Ring Mode must be Collective Call Waiting.
On phones with call appearance buttons, the call waiting indication takes the form of an alert on the next available call
appearance button. On other phones, call waiting indication is given by a tone in the speech path (the tone is locale
specific). The user's own Call Waiting setting is overridden when they are using a phone with call appearances.
Otherwise the user's own Call Waiting setting is used in conjunction with the hunt group setting.
798
281