User's Manual
Avaya Branch Gateway Manager 10.0 Page 713
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Telephone Features: Mobile Call Control
one-X Mobile Client Configuration File
During installation of the one-X Mobile software, a settings files is installed on the phone. For Windows phones, the file is
called settings.ini file, for Symbian single-mode phones the file is called setting.1xme file. For some phones, once the
software has been installed, the settings file values can be changed through the phone interface.
Example Settings Files
Windows Mobile 'settings.ini'
Symbian 'settings.1xme'
Dialing Prefixes and Codes
PRE_IMS=Dial;
DID_PREFIX = 1555776;
INTERNATIONAL_DIRECT_DIAL_PREFIX = 011;
NATIONAL_DIRECT_DIAL_PREFIX = 1;
HOME_COUNTRY_DIAL_CODE = +1;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 10;
USERS_EMERGENCY_NUMBERS = 112,999,911;
SETTINGS_PIN = 1234;
DID_PREFIX = 1555776;
INTERNATIONAL_DIRECT_DIAL_PREFIX = 011;
NATIONAL_DIRECT_DIAL_PREFIX = 1;
HOME_COUNTRY_DIAL_CODE = +1;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 10;
USERS_EMERGENCY_NUMBERS = 112,999,911;
SETTINGS_PIN = 1234;
DDI Suffixes for Features
These are used with the DDI_Prefix above to complete the DDI number for a particular FNE feature (see the table of
possible features above).
IDLE_APPEARANCE_SELECT = 9900;
ACTIVE_APPEARANCE_SELECT = 9901;
AUTO_CALL_BACK_TOGGLE = 9902;
DISABLE_AUTO_CALL_BACK_TOGGLE = 9903;
CALL_FORWARDING_ALL_ACTIVATION = 9904;
CALL_FORWARDING_BUSY_NO_ANSWER_ACTIVATION = 9905;
CALL_FORWARDING_DISABLE = 9906;
CALL_PARK = 9907;
CALL_UNPARK = 9908;
CALL_PICKUP_GROUP = 9909;
CALL_PICKUP_DIRECTED = 9910;
CALL_PICKUP_GROUP_EXTENDED = ;
CALLING_PARTY_NUMBER_BLOCK = 9912;
CALLING_PARTY_NUMBER_UNBLOCK = 9913;
CONFERENCE_ON_ANSWER = 9914;
DROP_LAST_ADDED_PARTY = 9915;
EXCLUSION = 9916;
HELD_APPEARANCE_SELECT = 9917;
OFF_PBX_ENABLE = 9919;
OFF_PBX_DISABLE = 9920;
SEND_ALL_CALLS_ENABLE = 9924;
SEND_ALL_CALLS_DISABLE = 9925;
TRANSFER_ON_HANGUP = 9926;
TRANSFER_TO_COVERAGE = 9927;
IDLE_APPEARANCE_SELECT = 9900;
ACTIVE_APPEARANCE_SELECT = 9901;
AUTO_CALL_BACK_TOGGLE = 9902;
DISABLE_AUTO_CALL_BACK_TOGGLE = 9903;
CALL_FORWARDING_ALL_ACTIVATION = 9904;
CALL_FORWARDING_BUSY_NO_ANSWER_ACTIVATION = 9905;
CALL_FORWARDING_DISABLE = 9906;
CALL_PARK = 9907;
CALL_UNPARK = 9908;
CALL_PICKUP_GROUP = 9909;
CALL_PICKUP_DIRECTED = 9910;
CALL_PICKUP_GROUP_EXTENDED = ;
CALLING_PARTY_NUMBER_BLOCK = 9912;
CALLING_PARTY_NUMBER_UNBLOCK = 9913;
CONFERENCE_ON_ANSWER = 9914;
DROP_LAST_ADDED_PARTY = 9915;
EXCLUSION = 9916;
HELD_APPEARANCE_SELECT = 9917;
OFF_PBX_ENABLE = 9919;
OFF_PBX_DISABLE = 9920;
SEND_ALL_CALLS_ENABLE = 9924;
SEND_ALL_CALLS_DISABLE = 9925;
TRANSFER_ON_HANGUP = 9926;
TRANSFER_TO_COVERAGE = 9927;
Enterprise Settings
SUB_MENU_NAME = My Company;
<Voicemail> = *17;
SUB_MENU_NAME = My Company;
<Voice Mail> = *17;
· Do NOT modify the tag names shown before the equals signs.
· Do NOT remove any tag rows. If a features is not being used or is unavailable leave the value between
the '=' and ';' blank.
· Do NOT remove the terminating semi-colon.
· All values MUST go between the ‘=’ and ‘;’.
· For those tags that match FNE features, the value should be the DID digits that will be passed to the
system for routing to the appropriate short code. This value is used in conjunction with the DID prefix to
form the full telephone number.
· The following tags MUST have values set (not necessarily those shown as examples below):
DDI_PREFIX = +1555776
INTERNATIONAL_DIRECT_DIAL_PREFIX = 011;
NATIONAL_DIRECT_DIAL_PREFIX = 1;
HOME_COUNTRY_DIAL_CODE = 1;
ARS_CODE = ;
EXTENSION_LENGTH = 3;
NATIONAL_NUMBER_LENGTH = 10;
USERS_EMERGENCY_NUMBERS = 112,999,911;