User's Manual

Avaya Branch Gateway Manager 10.0 Page 694
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Programming Appearance Buttons Using Branch Gateway Manager
If only button programming changes are required, the configuration changes can be merged back to the system without
requiring a reboot.
1. Start Branch Gateway Manager and load the current configuration from the system.
2. Locate and select the user for whom appearance buttons are required.
3. Select Button Programming.
· The number of buttons displayed is based on the phone associated with the user when the configuration was
loaded from the system. This can be overridden by selecting Display all buttons.
4. For the required button, click the button number and then click Edit.
5. Click the ... button.
6. From the list of options that appears, click Appearance.
7. Select the type of appearance button required.
8. Use the Action Data drop-down fields to select the required settings. Click OK.
9. Repeat for any additional call appearance buttons required. Click OK.
10.Repeat for any other users requiring appearance buttons.