User's Manual

Avaya Branch Gateway Manager 10.0 Page 686
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Delayed Ring Preference Example 2
This is similar to the previous example except that the user and the line has been configured for a 15 second ring delay.
This informs the users that the line has not been answered for some reason and allows them to answer it by just going
off-hook.
1. Phone Idle
The phone is idle. The current selected button has been determined by
Idle Line Preference as the first available call appearance button. This is
shown by the _ underscore next to that button.
2. Incoming Call Alerting on the Line
An incoming call arrives on the line and begin to alert somewhere on the
system. The user's line appearance button shows this visually but doesn't
ring audibly. Because Delayed Ring Preference is on for the user,
ringing line preference is not applied and idle line preference makes their
current selected button the first call appearance. If the user were to go
off-hook they would be making a call on that call appearance.
3. Call Continues Alerting
When the ring delay for the line appearance expires, if no other call has
taken ringing line preference it becomes the current selected call and will
be answered if the user goes off-hook.