User's Manual

Avaya Branch Gateway Manager 10.0 Page 673
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Apperance Button Operation: Line Appearance Buttons
8.5.4 Button Indication
On phones with a text display area next to the button, the label Line and the line number are displayed.
When the user is not connected to a call, the button indicated as selected is the button that will be used if the user goes
off hook without pressing an appearance button. When a user is connected to a call, that call is the selected button.
The following table shows how the different states of line appearance buttons (alerting, held, etc) are indicated. This is a
general table, not all phone button types are covered. The ring that accompanies the visual indication can be delayed or
switched off. See Ring Delay .
Icon Button
Dual LED Button
Line Appearance Button State
All off.
Idle
The associated line is not in use.
Idle + Selected
The associated line is not in use but the button is the user currently
selected button.
Flashing icon.
Red off,
Green steady flash.
Alerting
The line is ringing at its incoming call route destination. This is
accompanied by ringing. If the user is already on a call, only a single ring
is given.
Flashing icon.
Red on,
Green steady flash.
Alerting + Selected
As above but Ringing Line Preference has made this the user's current
selected button.
Red off,
Green on.
In Use Elsewhere
The line is in use.
Red on,
Green on.
In Use Here
The user has answered the line, made a call on it or bridged into the call
on the line.
Red off,
Green fast flash.
On Hold Here
The call on the line has been put on hold by this user.
Red off,
Green intermittent flash.
On Hold Elsewhere
The call on the line has been put on hold by another appearance button
user.
Icon flashes off.
Red off,
Green broken flash.
Inaccessible
The button pressed is not accessible. The call is still dialing, ringing,
routing or cannot be bridged into.
683