User's Manual

Avaya Branch Gateway Manager 10.0 Page 668
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
8.4.4 Button Indication
On phones with a text display area next to the button, the name of the covered user is displayed followed by the word
Cover.
When the user is not connected to a call, the button indicated as selected is the button that will be used if the user goes
off hook without pressing an appearance button. When a user is connected to a call, that call is the selected button.
The following table shows how the different states of call coverage appearance buttons (alerting, held, etc) are indicated.
This is a general table, not all phone button types are covered. The ring that accompanies the visual indication can be
delayed or switched off. See Ring Delay .
Icon Button
Dual LED Button
Call Coverage Button State
Red off,
Green off.
Idle
The button is not in use.
Flashing icon.
Red off,
Green steady flash.
Alerting
The call coverage is alerting for an unanswered call at the covered user's
phone. This is accompanied by ringing. If the user is already on a call,
only a single ring is given.
Flashing icon.
Red on,
Green steady flash.
Alerting + Selected
As above but Ringing Line Preference has made this the user's current
selected button.
Red on,
Green on.
In Use Here
The user has answered the call requiring coverage.
Red off,
Green fast flash.
On Hold Here
The covered call has been put on hold by the call coverage button user.
683