User's Manual

Avaya Branch Gateway Manager 10.0 Page 664
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
8.3.5 Button Indication
On phones with a text display area next to the button, the name of the bridged user and the label from the bridged user's
call appearance key are displayed.
The following table shows how the different states of bridged appearance buttons (alerting, held, etc) are indicated. This
is a general table, not all phone button types are covered. The ring that accompanies the visual indication can be delayed
or switched off. See Ring Delay .
Icon Button
Dual LED Button
Bridge Appearance Button State
Red off,
Green off.
Idle
The bridged appearance is not in use.
Flashing icon.
Red off,
Green steady flash.
Alerting
The matching call appearance is alerting for an incoming call. This is
accompanied by ringing. If the user is already on a call, only a single ring is
given.
Flashing icon.
Red on,
Green steady flash.
Alerting + Selected
As above but Ringing Line Preference has made this the user's current
selected button.
Red off,
Green on.
In Use Elsewhere
The matching call appearance button is in use.
Red on,
Green on.
In Use Here
The user has made a call or answered a call on the bridged appearance, or
bridged into it.
Red off,
Green fast flash.
On Hold Here
The call has been put on hold by this user.
Red off,
Green intermittent
flash.
On Hold Elsewhere
The call on that call appearance has been put on hold by another user.
Icon flashes off.
Red off,
Green broken flash.
Inaccessible
The button pressed is not usable. The call is still dialing, ringing or cannot be
bridged into.
683