User's Manual

Avaya Branch Gateway Manager 10.0 Page 658
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
8.2.4 Button Indication
On phones with a text display area next to the button, by default a=, b= and so on is displayed. This can be replaced by
another label if required.
When the user is not connected to a call, the button indicated as selected is the button that will be used if the user goes
off hook without pressing an appearance button. When a user is connected to a call, that call is the selected button.
The following table shows how the different states of call appearance buttons (alerting, held, etc) are indicated. This is a
general table, not all phone button types are covered. The ring that accompanies the visual indication can be delayed or
switched off. See Ring Delay .
Icon Button
Dual LED Button
Call Appearance Button State
Red off,
Green off.
Idle
The call appearance is not in use and is not currently selected.
Red on,
Green off.
Idle + Selected
The call appearance is not in use but is the current selected button that will be
used if the user goes off hook.
Flashing icon.
Red off,
Green steady
flash.
Alerting
The matching call appearance is alerting for an incoming call. This is
accompanied by ringing. If the user is already on a call, only a single ring is
given.
Flashing icon.
Red on,
Green steady
flash.
Alerting + Selected
As above but Ringing Line Preference has made this the user's current selected
button.
Red on,
Green on.
In Use Here
The user has a call connected on the call appearance or is dialing.
Red off,
Green on.
In Use Elsewhere
The call appearance button is in use on a bridged appearance.
Red off,
Green fast flash.
On Hold Here
The call has been put on hold by this user.
Red fast flash,
Green fast flash
On Hold Pending Transfer
Adding for 1400, 1600, 9500 and 9600 Series phones in Release 6.x.
Red off,
Green intermittent
flash.
On Hold Elsewhere
A call on a bridged appearance button matched to the call appearance has
been put on hold. Calls on a call appearance that are put on hold by another
user will continue to show connected lamp status, though the phone display
will indicate a held call.
Icon
flashes off.
Red off,
Green broken
flash.
Inaccessible
The button pressed is not accessible. The call is still dialing, ringing or cannot
be bridged into.
683