User's Manual

ManualsBrandsAvaya ManualsGatewayAvaya B5800 Branch Gateway Manager

641

642

643

644

645

646

647

648

649

650

Avaya Branch Gateway Manager 10.0 Page 642

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

7.3.141 Twinning

This action can be used by user's setup for mobile twinning. This action is not used for internal twinning.

· While the phone is idle, the button allows the user to set and change the destination for their twinned calls. It can

also be used to switch mobile twinning on/off and indicates the status of that setting.

· When a call has been routed by the system to the user's twinned destination, the Twinning button can be used to

retrieve the call at the user's primary extension.

· For user's setup for one-X Mobile Client, changes to their Mobile Twinning status made through the

system configuration or using a Twinning button are not reflected in the status of the Extension to

Cellular icon on their mobile client. However, changes to the Extension to Cellular status made from

the mobile client are reflected by the Mobile Twinning field in the system configuration. Therefore, for

one-X Mobile Client users, it is recommended that they control their Mobile Twinning status through the

one-X Mobile Client rather than through a Twinning button.

· Mobile Twinning Handover

When on a call on the primary extension, pressing the Twinning button will make an unassisted transfer to the

twinning destination. This feature can be used even if the user's Mobile Twinning setting was not enabled.

· During the transfer process the button will wink.

· Pressing the twinning button again will halt the transfer attempt and reconnect the call at the primary

extension.

· The transfer may return if it cannot connect to the twinning destination or is unanswered within the user's

configured Transfer Return Time (if the user has no Transfer Return Time configured, a enforced time of

15 seconds is used).

Details

· Action: Emulation | Twinning.

· Action Data: None.

· Default Label: Twinning.

· Toggles: .

· Status Indication: .

· User Admin: .

· Phone Support

Note that support for particular phone models is also dependant on the system software level.

· Analog:

· 1400 Series:

[1]

· 1600 Series:

[1]

· 2400 Series:

[1]

· 3700 Series:

· 4600 Series:

[1]

· 5400 Series:

[1]

· 5600 Series:

[1]

· 9500 Series:

· 9600 Series:

1.Not 1403, 1603, 2402, 4601, 4602, 5402, 5601 and 5602 models.

7.3.142 Unpark Call

This function is obsolete, since the Call Park function can be used to both park and retrieve calls and provides visual

indication of when calls are parked. Retrieve a parked call from a specified system park slot.

· Park and unpark features are not currently supported between systems in a multi-site network.