User's Manual

ManualsBrandsAvaya ManualsGatewayAvaya B5800 Branch Gateway Manager

631

632

633

634

635

636

637

638

639

640

Avaya Branch Gateway Manager 10.0 Page 637

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

Button Programming: Actions

7.3.133 Stamp Log

The stamp log function is used to insert a line into any System Monitor trace that is running. The line in the trace

indicates the date, time, user name and extension plus additional information. The line is prefixed with LSTMP: Log

Stamped and a log stamp number. When invoked from a Avaya phone with a display, Log Stamped# is also briefly

displayed on the phone. This allows users to indicate when they have experienced a particular problem that the system

maintainer want them to report and allows the maintainer to more easily locate the relevant section in the monitor trace.

The log stamp number is set to 000 when the system is restarted. The number is then incremented after each time the

function is used in a cycle between 000 and 999. Alternately if required, a specific stamp number can be assigned to the

button or short code being used for the feature.

Details

· Action: Advanced | Miscellaneous | Stamp Log.

· Action Data: Optional. Blank or any 3 digit number.

· Default Label: Stamp Log.

· Toggles: .

· Status Indication: .

· User Admin: .

· Phone Support

Note that support for particular phone models is also dependant on the system software level.

· Analog:

· 1400 Series:

· 1600 Series:

· 2400 Series:

· 3700 Series:

· 4600 Series:

· 5400 Series:

· 5600 Series:

· 9500 Series:

· 9600 Series:

7.3.134 Stored Number View

Not supported. Provided for CTI emulation only. Allows a user to view the contents of any programmed feature button.