User's Manual

ManualsBrandsAvaya ManualsGatewayAvaya B5800 Branch Gateway Manager

611

612

613

614

615

616

617

618

619

620

Avaya Branch Gateway Manager 10.0 Page 616

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

7.3.101 Inspect

Not supported. Provided for CTI emulation only. Allows users on display phones to determine the identification of held

calls. Allows users on an active call to display the identification of incoming calls.

Details

· Action: Emulation | Inspect.

· Action Data: None.

· Default Label: Inspt.

· Toggles: .

· Status Indication: .

· User Admin: .

· Phone Support

Note that support for particular phone models is also dependant on the system software level.

· Analog:

· 1400 Series:

[1]

· 1600 Series:

[1]

· 2400 Series:

[1]

· 3700 Series:

· 4600 Series:

[1]

· 5400 Series:

· 5600 Series:

[1]

· 9500 Series:

· 9600 Series:

1.Not 1403, 1603, 4601, 4602, 5601 and 5602.

7.3.102 Internal Auto-Answer

This function is also known as handsfree auto-answer. It sets the user's extension to automatically connect internal calls

after a single tone. This function should only be used on phones that support handsfree operation.

Details

· Action: Emulation | Internal Auto-Answer.

· Action Data: Optional.

· If left blank this function acts as described above for internal auto-answer.

· FF can be entered. In that case the button will enable/disable headset force feed operation for external calls. In

this mode, when headset mode is selected but the phone is idle, an incoming external call will cause a single

tone and then be automatically connected. This operation is only supported on Avaya phones with a fixed

HEADSET button. Ring delay is applied if set on the appearance button receiving the call before the call is auto-

connected.

· Default Label: HFAns or Auto Answer.