User's Manual

Avaya Branch Gateway Manager 10.0 Page 582
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
7.3.44 Clear Hunt Group Out Of Service
Changes the specified hunt groups status from Out of Service mode to 'In Service' mode. This button function is
obsolete. The Set Hunt Group Out Of Service function can be used to toggle a group in/out of service and provides
lamp status indication.
· This function is currently not supported between systems in a multi-site network. It can only be used by a
user currently logged onto the same system as hosting the hunt group.
Details
· Action: Advanced | Call | Clear Hunt Group Out of Service.
· Action Data: Group number.
· If left blank, the button will affect all hunt groups of which the user is a member.
· Default Label: HGOS-.
· Toggles: .
· Status Indication: .
· User Admin: .
· Phone Support
Note that support for particular phone models is also dependant on the system software level.
· Analog:
· 1400 Series:
[1]
· 1600 Series:
[1]
· 2400 Series:
[1]
· 3700 Series:
· 4600 Series:
[1]
· 5400 Series:
· 5600 Series:
[1]
· 9500 Series:
· 9600 Series:
1.Not 1403, 1603, 4601, 4602, 5601 and 5602.
7.3.45 Clear Quota
Quotas can be assigned on outgoing calls to data services such as internet connections. The quota defines the number of
minutes available for the service within a time frame set within the service, for example each day, each week or each
month.
The Clear Quota function can be used to reset the quota for a specific service or for all services.
Details
· Action: Advanced | Call | Clear Quota.
· Action Data: Service name" or "" (all services).
· Default Label: Quota.
· Toggles: .
· Status Indication: .
· User Admin: .
· Phone Support
Note that support for particular phone models is also dependant on the system software level.
· Analog:
· 1400 Series:
[1]
· 1600 Series:
[1]
· 2400 Series:
[1]
· 3700 Series:
· 4600 Series:
[1]
· 5400 Series:
· 5600 Series:
[1]
· 9500 Series:
· 9600 Series:
1.Not 1403, 1603, 4601, 4602, 5601 and 5602.
7.3.46 Coaching Intrusion
This feature allows the you to intrude on another user's call and to talk to them without being heard by the other call
parties to which they can still talk. For example: User A is on a call with user B. When user C intrudes on user A, they can
hear users A and B but can only be heard by user A.
· The ability to intrude and be intruded is controlled by two configuration settings, the Can Intrude (User |
Telephony | Supervisor Settings ) setting of the user intruding and the Cannot Be Intruded (User |
Telephony | Supervisor Settings ) setting of target being intruded on. The setting of any other internal party is
ignored. By default, no users can intrude and all users are set to cannot be intruded.
319
632
627
627
283
283 283
283