User's Manual

Avaya Branch Gateway Manager 10.0 Page 571
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Button Programming: Actions
7.3.26 Call Park
Allows the user to park and unpark calls. The button can be used in two ways, either associated with a specified park slot
number or unspecified.
· When associated with a specific park slot number, the button will park and unpark calls from that park slot and
indicate when a call is parked in that park slot. Similarly the Park buttons within application (for example
SoftConsole) can be used to park, retrieve and indicate parked calls.
· When not associated with a specific park slot number, the button will park calls by assigning them a park slot
number based on the users extension number. For example, for extension XXX, the first parked call is assigned to
park slot XXX0, the next to XXX1 and so on up to XXX9. The button will indicate when there are parked calls in any
of those slots. On the T7000 phone, only a single automatic part slot XXX0 is supported.
· With a call connected, pressing the button will park that call using a park slot number assigned by the system
based on the extension number.
· With no call connected, pressing the button will display details of any calls parked by the extension and allow
their retrieval.
· Park and unpark features are not currently supported between systems in a multi-site network.
Details
· Action: Emulation | Call Park.
· Action Data: Optional. Either blank or a specific park slot number. Name ca
· Park slot IDs can be up to 9 digits in length.
· Default Label: CPark or Call Park.
· Toggles: .
· Status Indication: .
· User Admin: .
· Phone Support
Note that support for particular phone models is also dependant on the system software level.
· Analog:
· 1400 Series:
[1]
· 1600 Series:
[1]
· 2400 Series:
[1]
· 3700 Series:
· 4600 Series:
[1]
· 5400 Series:
[1]
· 5600 Series:
[1]
· 9500 Series:
· 9600 Series:
1.Not 1403, 1603, 2402, 4601, 4602, 5402, 5601 and 5602.
627