User's Manual

Avaya Branch Gateway Manager 10.0 Page 568
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
7.3.22 Call Intrude
This feature allows you to intrude on the existing connected call of the specified target user. All call parties are put into a
conference and can talk to and hear each other. A Call Intrude attempt to a user who is idle becomes a Priority Call .
· The ability to intrude and be intruded is controlled by two configuration settings, the Can Intrude (User |
Telephony | Supervisor Settings ) setting of the user intruding and the Cannot Be Intruded (User |
Telephony | Supervisor Settings ) setting of target being intruded on. The setting of any other internal party is
ignored. By default, no users can intrude and all users are set to cannot be intruded.
The system support a range of other call intrusion methods in addition to this feature.
Details
· Action: Advanced | Call | Call Intrude.
· Action Data: User number or blank for entry when pressed .
· On large display phones, if configured without a preset target, this type of button will display an interactive
button menu for target selection.
· Default Label: Intru or Intrude.
· Toggles: .
· Status Indication: .
· User Admin: .
· Phone Support
Note that support for particular phone models is also dependant on the system software level.
· Analog:
· 1400 Series:
[1]
· 1600 Series:
[1]
· 2400 Series:
[1]
· 3700 Series:
· 4600 Series:
[1]
· 5400 Series:
· 5600 Series:
[1]
· 9500 Series:
· 9600 Series:
1.Not 1403, 1603, 4601, 4602, 5601 and 5602.
7.3.23 Call List
Not used for Avaya Branch Gateway.
Details
· Action: Advanced | Call | Call List.
· Action Data: None.
· Default Label: LIST.
· Toggles: .
· Status Indication: Required.
· User Admin: .
· Phone Support
This function is only supported for T3 phones.
488
283
283 283
283
731
509
509
627
627
510