User's Manual

Avaya Branch Gateway Manager 10.0 Page 550
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
7.3 Actions
The following sections provide details for each of the button actions supported by system. Note that this does not include
buttons on phones on a system running in Partner Edition mode.
For each the following details are listed:
· Action
Indicates the selection path to the action from within the list of actions displayed in Branch Gateway Manager.
· Action Data
Indicates the type of data required by the action. For some actions no data is required while for others action data
may be optional. The option to enter the data after pressing the button is not available for all phones, see
Interactive Button Menus .
· Default Label
This is the default text label displayed on phones which provide a display area next to programmable buttons.
Alternate labels can be specified in the system configuration or entered by the phone user (refer to the telephone
user guide). Note that for buttons with action data set, the action data may also be displayed as part of the default
label. Depending on the display capacity of the particular phone, either a short or long label is displayed.
· Toggles
Indicates whether the action toggles between two states, typically on or off.
· Status Indication
Indicates whether the button provides status indication relevant to the feature if the button has status lamps or
display. If the Status Indication is listed as Required it indicates that the button action is only supported on
programmable buttons that can provide status indication.
· User Admin
This item indicates that users with a Self-Administer button can assign the action to other buttons themselves.
· Phone Support
This is only a general indication of support or otherwise of an action by phones within particular series. On phones
with 3 or less programmable buttons those button can only be used for the Call Appearance action. In addition
some actions are only supported on phones where the programmable buttons provide status indication and or a
display for data entry once the feature is invoked.
Table of Button Programming Actions
The following tables list the actions available for programmable buttons on system.
· Login Code Required
Some function may require the user to enter their log in code. This typically applies when the action data is left blank
for entry when the button is pressed.
General
Action
Action Data
Default Label
Dial
Any number.
Dial
Group
"Group name" in quote marks.
<Group name>
User
"User name" in quote marks.
<User name>
Appearance
Action
Action Data
Default Label
Appearance
None.
a=
Bridged Appearance
User name and call appearance button
number.
<user name><appearance label>
Coverage Appearance
User name.
<user name>
Line Appearance
Line appearance ID.
Line
Emulation
Action
Action Data
Short Label
Long Label
Abbreviated Dial
Any number.
AD
Abbreviate
Dial
Abbreviated Dial Pause
None.
Pause
–
Abbreviated Dial Program
None.
Prog
–
Abbreviated Dial Stop
None.
Stop
–
Account Code Entry
Account code or blank for entry when pressed.
Acct
Account
509
627
510
588
609
644
562
566
587
617
555
555
556
556
556