User's Manual

Avaya Branch Gateway Manager 10.0 Page 548
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Button Programming
The process below can be used to assign functions to programmable buttons on T-Series and M-Series phones. Existing
button can be overwritten except buttons set to appearance functions.
1.Press Feature *3. If a security code is requested, enter your phone login code and press #.
2.Use one of the processes below. Press * to switch between processes (or More if displayed). On T7000 phones,
only the first process is supported.
a. Select Button and then Function
i. Press the button to program.
ii. Enter the feature code of the function required (the only * function supported is *7 for contrast).
iii.If the button has an existing function it is displayed and the option to replace the button or return to
function selection.
b. Select Function and then Button
i. Enter the number for the feature required or use the volume buttons to move through the list of
functions.
01. Speed dial
02. Ring Again
03. Conference
04. Call Forward All
05. Last Number
Redial
06. Page Group
07. Voicemail
08. Automatic
Intercom
09. Priority Call
10. Transfer
11. Call Park
12. Group Pickup
13. Direct Pickup
14. Timer
15. Do Not Disturb On
16. Contrast
17. Group Listen On
18. Time of Day
17. Call Log
18. Self-Administer
19. Account Code
20. Forward on Busy
21. Forward on No
Answer
22. Pickup
23. Directory
24. Flash Hook
25. Internal Auto Answer
26. Set Hunt Group Night
Service
27. Twinning
28. Ringer Off
ii. Press Hold to select a currently displayed function.
iii.Press the button to which the function should be assigned.
iv.If the button has an existing function it is displayed and the option to replace the button or return to
function selection.
c. Default Buttons
When Default Buttons is displayed, press Hold (or the Prog softkey if displayed). The phone buttons are
defaulted to those appropriate to the phone type. Note that only buttons that have a default function on the
phone type are defaulted. It does not affect the functions assigned to any buttons that do not have default
functions.
Some button function use the directory to allow number selection. When this is the case, the volume buttons are used to
scroll through the list of matching names. If this is done during a call or while a call is alerting, this will also adjust the
call or ring volume.
636
625
584
608
617
611
648
563
620
641
571
574
594
640
598
627
610
639
570
627
556
606
608
572
596
601
616
631
642
626