User's Manual

Avaya Branch Gateway Manager 10.0 Page 547
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Button Programming: Phone Details
Administration Functions
The following feature codes can be used to edit phone settings. Some functions may request a security code after the
feature code is entered. When this occurs, enter your phone login code and press #.
Function
Feature Code
Description
Button Inspect
*0
After selecting this function, pressing any programmable button will display the
function currently assigned to that button.
Not supported on phones without a display and phones on the DECT systems.
Speed Dial Button
(Abbreviated Dial )
*1
This feature allows the user to store a number against a programmable button.
After entering the code, press the button to be programmed and then enter
the number that the button should dial.
Note that any existing function on the button is overwritten.
Not supported on phones on DECT systems.
Internal Autodial
(User )
*2
This feature allow the user to create a user button that matches another user
extension number. The button can then be used to call the other user and also
to see the current state of the other user.
After entering the code, press the button to be programmed and then enter
the other user's extension number.
Note that any existing function on the button is overwritten.
Not supported on phones on DECT systems.
Button Program
(Self-Administer )
*3
This feature allows programming of a range of features onto programmable
buttons. See below for details.
Not supported on phones without a display and phones on the DECT systems.
Edit Personal Speed
Dial
*4
This feature code allows configuration of personal directory records for use as
speed dials.
After selecting this function, dial the two digit number between 00 to 99 for
the personal directory record to be programmed. Note that no warning is given
if the record is already programmed.
Enter the number and press Hold. Then enter a name to associate with the
number. The volume buttons are used to move the cursor. When complete,
press Hold again.
Not supported on phones without a display and phones on the DECT systems.
Ringer Type
*6
Adjust the ringer sound type. When selected, the number keys 1 to 4 can be
used to select the required ringer. The volume can also be adjusted using the
volume controls.
Contrast
*7
Adjust the display contrast. When selected, the number keys 1 to 9 can be
used to select the required contrast.
Not supported on phones without a display and phones on the DECT systems.
Ringer Volume
*80
This feature code causes the phone's ringer to sound for a short period during
which its volume can be adjusted using the phone's volume controls.
Not supported on phones on DECT systems.
Enbloc
*82
This code allows the user to switch enbloc dialing on or off.
When off (the default), dialing a number without going off hook will
automatically select the first available call appearance button.
When on, the user can dial a telephone number without it being sent to the
phone system. When the number is complete, going off hook or selecting an
appearance button will dial the number.
Not supported on phones without a display.
555
644
627