User's Manual
Avaya Branch Gateway Manager 10.0 Page 545
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Button Programming: Phone Details
7.2.15 T-Series
M-Series and T-Series phones can access a range of functions by pressing the phone's Feature key and dialing the
required feature code.
Function
Feature Code
Description
Speed Dial
0 <index>
This feature code can be used to dial a stored number.
· If Feature 0 is followed by a 3-digit index number in the range 000 to
999, the system directory record with the matching index is dialed.
· If Feature 0 is followed by * and a 2-digit index number in the range
00 to 99, the personal directory record with the matching index is
dialed. Alternatively Feature 0 can be followed by 00# to 99#.
Ring Again
2
Sets a ringback on the extension being called. When the target extension ends
its current call, the ringback users is rung and if they answer, a new call is
made to the target extension.
Ring Again Cancel
#2
Cancel the currently set 'ring again' function.
Conference
3
Turn the current call and held call into a conference call. The held call can be
an existing conference to which you want to add another call.
Forward
Unconditional On
4 <number>
Switch on immediate forwarding of calls to the number entered. If a number is
already set, that number is displayed and can be used or replaced by dialing a
new number.
On phones with a display, an D for divert is displayed when forward
unconditional is on.
Forward
Unconditional Off
#4
Switch off immediate call forwarding. The forwarding number is left set.
Last Number Redial
5
Redial the last number dialed for a normal call. This code can only be used
when the phone is currently idle.
Page
60 <number>
Makes a paging call to an extension or group specified. If no number is
specified, this can be dialed after pressing the button. The target extension or
group members must be free and must support handsfree auto-answer in
order to hear the page.
On Avaya phones with a CONFERENCE button, a paged user can convert the
page call into a normal call by pressing that button.
Retrieve Messages
65
Access the user's voicemail box to collect messages. Same as Feature 981.
Dial Voice Call
66 <number>
Automatic intercom functions allow you to call an extension and have the
call automatically answered on speaker phone after 3 beeps. The extension
called must support a handsfree speaker. If the extension does not have a
handsfree microphone then the user must use the handset if they want to talk.
If the extension is not free when called, the call is presented as a normal call
on a call appearance button if available.
Priority Call
69
This feature allows the user to call another user even if they are set to 'do not
disturb'. A priority call will follow forward and follow me settings but will not go
to voicemail. Not supported on phones without a display and phones on the
DECT systems.
Transfer (Internal)
70 <number>
Using this code put the current call on hold pending transfer and makes an
transfer enquiry call to the number entered. Pressing Feature 70 again or
selecting Complete on the display completes the transfer.
Pressing the Release button or selecting Cancel on the display ends the
transfer call attempt and reconnects the call that was held pending transfer.
An available call appearance is required to initiate the transfer process.
Reserve Last CA can be used to help reserve a call appearance for outgoing
call or transfer usage.
Call Park
74
Allows the user to park the current call. The park slot number used is based on
the extension number. For example, for extension XXX, the first parked call is
assigned to park slot XXX0, the next to XXX1 and so on up to XXX9.
636
366
307
625
577
584
608
607
617
611
648
591 743
620
641
571