User's Manual

Avaya Branch Gateway Manager 10.0 Page 51
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Mode: Editing Configuration Settings
2.12.9 Creating an Offline Configuration
Branch Gateway Manager can be used to create a new configuration without connecting to a system. This allows the
creation of a configuration prior to installation of the real system and so can be used to speed up the installation
process.
· The configuration created must match the physical equipment in the system into which the configuration will be
loaded. Doing otherwise may cause the system to reset and experience other problems.
· The Create Configuration tool includes all control units, external expansion modules and trunk cards supported.
It is your responsibility to confirm what equipment is supported in your locale.
Creating a New Configuration
1.With no configuration loaded, if necessary switch Branch Gateway Manager to its simplified view by selecting View
| Simplified view.
2.Click on Create an Offline Configuration.
3.In the Configuration drop down select Avaya Branch Gateway.
4.Select a Locale. The hardware selections available are affected by the locale and are reset if you later change the
locale.
5.In the Extension Number Length drop down, select the appropriate extension length.
6.In the System Units drop down, select the appropriate unit.
7.From the System Units drop down, select the extension/VCM cards and expansion modules that match your
system.
8.Click OK.