User's Manual

Avaya Branch Gateway Manager 10.0 Page 508
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
7.1 Programming Buttons
7.1.1 Programming Buttons with Manager
Using Branch Gateway Manager, if only button programming changes are required, the configuration changes can be
merged back to the system without requiring a reboot.
· Appearance Functions
The functions Call Appearance, Bridged Appearance, Coverage and Line Appearance are collectively known
as "appearance functions". For full details of their operation and usage refer to the Appearance Button Operation
section.
1. Using Branch Gateway Manager load the current configuration from the system.
2. Select the User required to display their configuration details.
3. Select Button Programming.
· The number of button displayed is based on the phone associated with the user when the configuration was
loaded. This can be overridden by selecting Display All Buttons. This may be necessary for users who switch
between different phones using hot desking or have an expansion unit attached to their phone.
4. For the required button, either select the button and then click Edit or double-click the button.
5. Edit the settings as required. Use the ... button to display the menu for selecting the required button action. Select
the action and set the action data, then click OK.
6. Click OK. Repeat for any other buttons.
7. Click OK.
An alternate method for the above programming is to right-click on the various fields. To do this start with the Action
field, then Action Data and then Label if required.
653