User's Manual

Avaya Branch Gateway Manager 10.0 Page 496

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

6.8.116 Set Inside Call Seq

This feature allows the user to select the ringing used on their analog extension for internal calls.

The number entered corresponds to the ring pattern required. This is 0 for Default Ring, 1 for RingNormal, 2 for

RingType1, etc. For more information on selectable ringing patterns, see Ring Tones . Use of this short code function

is applicable to analog phone users only. The distinctive ringing pattern used for other phones is set by the phone

type.

Details

· Telephone Number: Number corresponding to the desired ring pattern. See Ring Tones .

· Default Short Code:

· Programmable Button Control: ICSeq

· See also: Set Ringback Seq , Set Inside Call Seq .

Example

This Short Code allows a user to change their inside call pattern. N represents the number corresponding to the Call

Sequence the user wishes to choose, the numbering starts at 0 selecting Default Ring, 1 selects Ring Normal, 2 selects

RingType1, etc. For example, if a user wants to set her/his internal ring pattern to RingType1, the user would dial

*80*2# because 2 corresponds to RingType1. This short code is useful for distinguishing an external call from an internal

one simply by the ring tone.

· Short Code: *80*N#

· Telephone Number: N

· Feature: SetInsideCallSeq

739

633

499 496