User's Manual

Avaya Branch Gateway Manager 10.0 Page 492
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
6.8.111 Set Absent Text
This feature can be used to select the user's current absence text. This text is then displayed to internal callers who have
suitable display phones or applications. It doesn't changes the users status. The absence text message is limited to 128
characters. Note however that the amount displayed will depend on the caller's device or application.
The text is displayed to callers even if the user has forwarded their calls or is using follow me.
Details
· Telephone Number: The telephone number should take the format "y,n,text" where:
· y = 0 or 1 to turn this feature on or off.
· n = the number of the absent statement to use, see the list below:
· 0 = None.
· 4 = Meeting until.
· 8 = With cust. til.
· 1 = On vacation until.
· 5 = Please call.
· 9 = Back soon.
· 2 = Will be back.
· 6 = Don't disturb until.
· 10 = Back tomorrow.
· 3 = At lunch until.
· 7 = With visitors until.
· 11 = Custom.
· text = any text to follow the absent statement.
· Default Short Code:
· Programmable Button Control: Absnt
Example
The following short code can be used to turn an absent text message on:
· Short Code: *88
· Telephone Number: "1,5,me on 208"
· Line Group ID: 0
· Feature: SetAbsentText
Example
The following short code could be used to turn this facility off. In the Telephone Number the first 0 is used to turn this
facility off and the second 0 is used to select the absent statement "None".
· Short Code: *89
· Telephone Number: "0,0"
· Line Group ID: 0
· Feature: SetAbsentText
629