User's Manual

Avaya Branch Gateway Manager 10.0 Page 491
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Short Codes: Short Code Features
6.8.108 Retrieve Call
Retrieves a call previously held to a specific ISDN exchange slot.
Details
· Telephone Number: Exchange hold slot number.
· Default Short Code: *25*N# (A-Law only)
· Programmable Button Control: Retriv
· See also: Hold Call .
Example
Below is sample short code using the Retrieve Call feature. N represents the exchange slot number from which the call
has been placed on hold. For example, if a user has placed a call hold on slot number 4, the user can resume that call by
dialing *25*4#.
· Short Code: *25*N#
· Telephone Number: N
· Feature: RetrieveCall
6.8.109 Ring Back When Free
This feature sets a ringback on the specified extension. This sets a 'ringback when free' on an extension currently on a
call or a 'ringback when next used' for an extension that is free but does not answer.
When the target extension is next used or ends its current call, the users is rung and when they answer a call is made to
the target extension.
Details
· Telephone Number: Target extension number.
· Default Short Code:
· Programmable Button Control: RBak+
· See also: Cancel Ring Back When Free .
Example
N represents the target extension from which you want to receive the callback. For example, if you call extension 201 but
the line is busy, hang up and then dial *71*201#. When extension 201 disconnects from its current call, your phone will
ring. Once you pick up the phone, extension 201's line will start ringing to indicate an incoming call.
· Short Code: *71*N#
· Telephone Number: N
· Feature: RingBackWhenFree
6.8.110 Secondary Dial Tone
Not supported by B5800 Branch Gateway.
624
480
625
449