User's Manual

Avaya Branch Gateway Manager 10.0 Page 48

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

2.12.7 Creating New Records

There are a number of ways in which you can add new records to the configuration currently loaded in Branch Gateway

Manager.

Adding a New Record Using the Details Pane

1.Use the navigation pane, groups pane or navigation toolbar, select an existing record of the type required.

2.Click at the top-right of the details pane.

3.Select the type of record required. For example, with extensions you can select from H.323 Extension or SIP

Extension.

4.Complete the settings for the new record and click OK.

Adding a New Record Using the Group Pane

1.Using the navigation pane or navigation toolbar, select the type of record required.

2.Right-click on the group pane and select New.

3.If a list is displayed, select the specific type of record required.

4.Complete the settings for the new record and click OK.

Adding a New Record Using the Navigation Pane

1.In the navigation pane, right-click on the type of record required and select New.

2.If a list is displayed, select the specific type of record required.

3.Complete the settings for the new record and click OK.

Importing Records

New records can be created for users, hunt groups, short codes and directory entries by importing files. See Importing

and Exporting Settings .

Automatic Creation of Records

There are scenarios where new records are automatically added to the configuration:

· Certain default records are added to the configuration when a new system is started or when a system

configuration is erased .

· New records for extensions and lines are automatically added to match the hardware present when a system is

started or rebooted.

· For telephones connected via IP links (H.323, SIP and DECT), the system can be configured to automatically

create extension and or user records to match the telephone.

Using Templates to Create Records

Branch Gateway Manager supports a number of methods by which new records can be created from templates.

· Trunk Templates

SIP trunks can be created from templates. For analog trunks, records are automatically created by the presence of

the trunk hardware, however a template can then be applied to an analog trunk.

107

190