User's Manual

Avaya Branch Gateway Manager 10.0 Page 460
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
6.8.46 Dial Fax
This feature is used to route fax calls via Fax Relay .
Details
· Telephone Number: Fax destination number.
· Default Short Code:
· Programmable Button Control:
Example
In this example, the line group ID matches the URI configured on a SIP line that has been configured for Fax Relay.
· Short Code: 6N
· Telephone Number: N"@192.16.42.5"
· Line Group ID: 17
· Feature: Dial Fax
6.8.47 Dial Inclusion
This feature allows you to intrude on another user's call to talk to them. Their current call is put on hold while you talk
and automatically reconnected when you end the intrusion. The intruder and the target extension can then talk but
cannot be heard by the other party. This can include intruding into a conference call, where the conference will continue
without the intrusion target.
During the intrusion all parties hear a repeated intrusion tone. When the intruder hangs-up the original call parties are
reconnected. Attempting to hold a dial inclusion call simply ends the intrusion. The inclusion cannot be parked.
· The ability to intrude and be intruded is controlled by two configuration settings, the Can Intrude (User |
Telephony | Supervisor Settings ) setting of the user intruding and the Cannot Be Intruded (User |
Telephony | Supervisor Settings ) setting of target being intruded on. The setting of any other internal party is
ignored. By default, no users can intrude and all users are set to cannot be intruded.
The system support a range of other call intrusion methods in addition to this feature.
Details
· Telephone Number: Target extension number.
· Default Short Code:
· Programmable Button Control: Inclu.
· See also: Call Intrude , Call Listen , Coaching Intrusion , Whisper Page .
Example
N represents the extension to be intruded upon. For example, if a user dials *97*201# while extension 201 is on a call,
then the user is intruding into extn. 201's current call.
· Short Code: *97*N#
· Telephone Number: N
· Feature: DialInclusion
6.8.48 Dial Paging
This feature makes a page call to an extension or group. The target extension or group members must support page calls
(that is be able to auto-answer calls).
Details
· Telephone Number: Extension or group number.
· Default Short Code:
· Programmable Button Control: Page
· See also: Dial Direct .
727
283
283 283
283
731
590
441 442 453 505
591
458