User's Manual

Avaya Branch Gateway Manager 10.0 Page 396
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.20.4.3 Multi-line Options
Multi-line options are applied to a user's phone when the user is using an Avaya phones which supports appearance
buttons (call appearance, line appearance, bridged and call coverage). See Appearance Button Operation .
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Individual Coverage Time (secs): Default = 10 seconds, Range 1 to 99999 seconds.
This function sets how long the phone will ring at your extension before also alerting at any call coverage users. This
time setting should not be equal to or greater than the No Answer Time.
5.20.4.4 Call Log
The system can store a centralized call log for users. Each users' centralized call log can contain up to 30 call records
for user calls. When this limit is reached, each new call records replaces the oldest previous record.
On Avaya phones with a fixed Call Log or History button (1400, 1600, 9500 and 9600 Series), that button can be used
to display the user's centralized call log. The centralized call log is also used for M-Series and T-Series phone. The user
can use the call log to make calls or to store as a personal speed dial. They can also edit the call log to remove records.
The centralized call log moves with the user if they log on and off from different phones. This includes if they hot desk
within a network.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Centralized Call Log: Default = System Default (On)
This setting allows the use of centralized call logging to be enabled or disabled on a per user basis. The default is to
match the system setting Default Centralized Call Log On (System | Telephony | Call Log ). The other
options are On or Off for the individual user. If off is selected, the call log shown on the users phone is the local call
log stored by the phone.
· Delete records after (hours:minutes): Default = 00:00 (Never).
If a time period is set, records in the user's call log are automatically deleted after this period.
· Groups: Default = System Default (On).
This section contains a list of hunt groups on the system. If the system setting Log Missed Huntgroup Calls
(System | Telephony | Call Log) has been enabled, then missed calls for those groups selected are shown as part
of the users call log. The missed calls are any missed calls for the hunt group, not just group calls presented to the
user and not answered by them.
653
723
165 165
159
159