User's Manual

Avaya Branch Gateway Manager 10.0 Page 395
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: User Rights
5.20.4.2 Supervisor Settings
These settings relate to user features normally only adjusted by the user's supervisor.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Can Intrude: Default = Off
Check this option if the User can interrupt other user's calls. This setting and the setting below are used to control the
use of the following short code and button features: Call Intrude, Call Listen, Call Steal and Dial Inclusion.
· Cannot be Intruded: Default = On
If checked, this user's calls cannot be interrupted or acquired. In addition to the features listed above, this setting also
affects whether other users can use their appearance buttons to bridge into a call to which this user has been the
longest present user.
· Force Login: Default = Off
If checked, the user must log in using their Login Code to use an extension. For example, if Force Login is ticked for
User A and user B has logged into A's phone, after B logs off A must log back. If Force Login was not ticked, A would
be automatically logged back in.
· Force Account Code: Default = Off
If checked, the user must enter a valid account code to make an external call.
· Inhibit Off-Switch Forward/Transfer: Default = Off
When enabled, this setting stops the user from transferring or forwarding calls externally. Note that all user can be
barred from forwarding or transferring calls externally by the System | Telephony | Telephony | Inhibit Off-Switch
Forward/Transfers setting.
· Outgoing Call Bar: Default = Off
When set, bars the user from making external calls.
· Coverage Group: Default = <None>.
If a group is selected, the system will not use voicemail to answer the users unanswered calls. Instead the call will
continue ringing until either answered or the caller disconnects. For external calls, after the users no answer time, the
call is also presented to the users who are members of the selected Coverage Group. For further details refer to
Coverage Groups .
159
726