User's Manual

Avaya Branch Gateway Manager 10.0 Page 38
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
2.11 The Status Bar
The status bar at the base of the Branch Gateway Manager screen is used to display icons and messages about
communications between Branch Gateway Manager and systems. If the Branch Gateway Manager is also acting as a
BOOTP and TFTP server it will also show BOOTP and TFTP messages.
A padlock icon is displayed whenever the Branch Gateway Manager communications settings are set to secure. This
indicates all attempted configuration and security settings exchanged will be attempted over a secure TLS link:
Status bar messages display information about communications the Branch Gateway Manager application receives. Some
typical status bar messages are listed below.
· Ready
This message is normally seen when Branch Gateway Manager has just started and no configuration has been
received.
· Received BOOTP request for 001125465ab2, unable to process
Branch Gateway Manager is acting as a BOOTP server. It has received a BOOTP request that does not match a
system listed in its BOOTP records. The cause may be a device or application, other than an Avaya Branch
Gateway, that also uses BOOTP.
· TFTP: Received TFTP Error "NotFound" from 192.168.42.1
An attempt to receive settings from or send settings to the system failed. The most probable cause is a name or
password error.
· TFTP: Received 17408 bytes for Marks_Test
Branch Gateway Manager has received configuration settings from the named system using TFTP.
·
Branch Gateway Manager has sent the indicated file in response to a BOOTP request.