User's Manual

Avaya Branch Gateway Manager 10.0 Page 362
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
· BACP: Default = Off
Enables the negotiation and use of BACP/BCP protocols. These are used to control the addition of B channels to
increase bandwidth.
· Incoming traffic does not keep link up: Default = On
When enabled, the link is not kept up for incoming traffic only.
· Multilink/QoS: Default = Off
Enables the negotiation and use of Multilink protocol (MPPC) on links into this Service. Multilink must be enabled if
there is more than one channel that is allowed to be Bundled/Multilinked to this RAS Service.