User's Manual

Avaya Branch Gateway Manager 10.0 Page 36

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

2.10 Altering the Interface

The Branch Gateway Manager configuration settings interface can be customized in a number of ways. These changes are

remembered the next time Branch Gateway Manager is started.

Resizing the Branch Gateway Manager Window

When the Branch Gateway Manager window is not maximized or minimized, it size can be adjusted.

1.Place the cursor over the edge of the current window.

2.When the cursor changes to a double-headed arrow, click and hold the cursor.

3.Drag the edge to the required position and then release the cursor.

Moving the Border Between the Panes

The border between the visible panes can be adjusted. Note that this is a proportional rather than exact position. If the

whole window size is altered, the border position may also move.

1.Place the cursor over the border between two panes.

2.When the cursor changes to a double headed arrow with a bar through it, click and hold the cursor.

3.Drag the border to the required position and release the cursor.

Showing or Hiding Toolbars

The different toolbars can be hidden if not required.

1.Select View and then Toolbars. Those toolbars currently shown are indicated by a tick mark.

2.To show or hide a toolbar, click on its name.

Moving Toolbars

The position of the Branch Gateway Manager toolbars can be moved. Note that when moving a toolbar, the other toolbars

and panes may adjust their size or position to ensure that all the toolbar icons remain visible.

1.Place the cursor over the end of the toolbar.

2.When the cursor changes to a four-way arrow, click and hold the cursor.

3.Move the toolbar to the required position and release the cursor.

Showing or Hiding Panes

The details pane cannot be hidden. The navigation pane, group pane and error pane can be shown or hidden. To do this

use either of the following methods.

1.From the main toolbar, use the following icons:

· Hide/Show Navigation Pane.

· Hide/Show Group Pane.

· Hide/Show Error Pane.

1.Select View. Those panes currently shown are indicated by a tick mark.

2.To show or hide a pane, click on its name.