User's Manual

Avaya Branch Gateway Manager 10.0 Page 357
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: WAN Port
5.13.2 Frame Relay
This tab is only available for Frame Relay records. These show SyncFrameRelay as the Mode on the WAN Port tab.
Usability
· Mergeable: These settings are not mergeable. Changes to these settings will require a reboot of the system.
Configuration Settings
· Frame Management Type
This must match the management type expected by the network provider. Selecting AutoLearn allows the system to
automatically determine the management type based on the first few management frames received. If a fixed option is
required the following are supported: Q933 AnnexA 0393, Ansi AnnexD , FRFLMI and None.
· Frame Learn Mode
This parameter allows the DLCIs that exist on the given WAN port to be provisioned in a number of different ways.
· None
No automatic learning of DLCIs. DLCIs must be entered and configured manually.
· Mgmt
Use LMI to learn what DLCIs are available on this WAN.
· Network
Listen for DLCIs arriving at the network. This presumes that a network provider will only send DLCIs that are
configured for this particular WAN port.
· NetworkMgmt
Do both management and network listening to perform DLCI learning and creation.
· Max Frame Length
Maximum frame size that is allowed to traverse the frame relay network.
· Fragmentation Method
Options are RFC1490 or RFC1490+FRF12.