User's Manual

Avaya Branch Gateway Manager 10.0 Page 351
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: Incoming Call Route
· X = Single Digit Wildcard
Use X's to enter a single digit wild card character. For example 91XXXXXXXX will only match DID numbers of at
least 10 digits and starting with 91, -91XXXXXXXX would only match numbers of exactly 10 digits starting with 91.
Other wildcard such as N, n and ? cannot be used.
· Where the incoming number potentially matches two incoming call routes with X wildcards and the number of
incoming number digits is shorter than the number of wildcards, the one with the shorter overall Incoming
Number specified for matching is used.
· i = ISDN Calling Party Number 'National'
The i character does not affect the incoming number matching. It is used for Outgoing Caller ID Matching, see notes
below.
· Incoming Sub Address: Default = Blank (Match all)
Matches any sub address component sent with the incoming call. If this field is left blank, it matches all calls.
· Incoming CLI: Default = Blank (Match all)
Enter a number to match the caller's ICLID provided with the call. This field is matched left-to-right. Number options
are:
· Full telephone number.
· Partial telephone number, for example just the area code.
· ! : Matches calls where the ICLID was withheld.
· ? : for number unavailable.
· Blank for all.