User's Manual

Avaya Branch Gateway Manager 10.0 Page 349
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: Incoming Call Route
Example 3
In the following example, the 677 record is used as the match for 77 as it has more matching digits than the 7 record
and no non-matching digits.
Line Group
Incoming Number
Destination
0
677
Support
0
7
Services
0
blank
Main
Example 4
In this example the digits 777 are received. The 677 record had a non-matching digit, so it is not a match. The 7 record
is used as it has one matching digit and no non-matching digits.
Line Group
Incoming Number
Destination
0
677
Support
0
7
Services
0
blank
Main
Example 5
In this example the digits 77 are received. Both the additional incoming call routes are potential matches. In this case the
route with the shorter Incoming Number specified for matching is used and the call is routed to Services.
Line Group
Incoming Number
Destination
0
98XXX
Support
0
8XXX
Services
0
blank
Main
Example 6
In this example two incoming call routes have been added, one for incoming number 6XXX and one for incoming number
8XXX. In this case, any three digit incoming numbers will potential match both routes. When this occurs, potential match
that was added to the system configuration first is used. If 4 or more digits were received then an exact matching or
non-matching would occur.
Line Group
Incoming Number
Destination
0
6XXX
Support
0
8XXX
Services
0
blank
Main