User's Manual

Avaya Branch Gateway Manager 10.0 Page 341
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: Service
5.10.1.4 Autoconnect
Fields in this tab enable you to set up automatic connections to the specified Service.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Auto Connect Interval (mins): Default = 0 (disabled). Range = 0 to 99999 minutes.
This field defines how often this Service will automatically be called ("polled"). For example setting 60 means the
system will call this Service every hour in the absence of any normally generated call (this timer is reset for every call;
therefore if the service is already connected, then no additional calls are made). This is ideal for SMTP Mail polling from
Internet Service Providers.
· Auto Connect Time Profile: Default = <None>
Allows the selection of any configured Time Profiles. The selected profile controls the time period during which
automatic connections to the service are made. It does NOT mean that connection to that service is barred outside of
these hours. For example, if a time profile called "Working Hours" is selected, where the profile is defined to be
9:00AM to 6:00PM Monday to Friday, then automatic connection to the service will not be made unless its within the
defined profile. If there is an existing connection to the service at 9:00AM, then the connection will continue. If there is
no connection, then an automatic connection will be made at 9:00AM.