User's Manual

Avaya Branch Gateway Manager 10.0 Page 328
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.8.9 SIP
Each hunt group can be configured with its own SIP URI information. For calls received on a SIP line where any of the
line's SIP URI fields are set to Use Internal Data, if the call is presented to the hunt group that data is taken from these
settings.
This form is hidden if there are no system multi-site network lines in the configuration or no SIP lines with a URI set to
Use Internal Data.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· SIP Name: Default = Blank on Voicemail tab/Extension number on other tabs.
The value from this field is used when the From field of the SIP URI being used for a SIP call is set to Use
Internal Data.
· SIP Display Name (Alias): Default = Blank on Voicemail tab/Name on other tabs.
The value from this field is used when the Display Name field of the SIP URI being used for a SIP call is set to Use
Internal Data.
· Contact: Default = Blank on Voicemail tab/Extension number on other tabs.
The value from this field is used when the Contact field of the SIP URI being used for a SIP call is set to Use
Internal Data.
· Anonymous: Default = On on Voicemail tab/Off on other tabs.
If the From field in the SIP URI is set to Use Internal Data, selecting this option inserts Anonymous into that
field rather than the SIP Name set above.