User's Manual

Avaya Branch Gateway Manager 10.0 Page 320
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Time Profile: Default = <None> (No automatic night service)
This field allows selection of a previously created Time Profile . That profile then specifies the times at which it
should use the manually selected Service Mode settings. Outside the period defined in the time profile, the hunt group
behaves as if set to Night Service mode.
· Please note that when a hunt group is in Night Service due to it associated time profile, this is not reflected by the
Service Mode on this tab. Note also that the manual controls for changing a hunt group's service mode cannot be
used to take a hunt group out of time profile night service.
· Out of Service Fallback Group: Default = <None> (Voicemail or Busy Tone)
This field sets the alternate hunt group destination for calls when this hunt group is in Out of Service mode. If left
blank, calls are redirected to voicemail if available or otherwise receive busy tone.
· Night Service Fallback Group: Default = <None> (Voicemail or Busy Tone)
This field sets the alternate hunt group destination for calls when this hunt group is in Night Service mode. If left blank,
calls are redirected to voicemail if available or otherwise receive busy tone.
· Service Mode: Default = In Service
This field is used to manually select the current service mode for the hunt group.
· Setting and clearing hunt group night service can be done using either manual controls or using a system time
profile. The use of both methods to control the night service status of a particular hunt group is not
supported.
· Out of Service
When selected, calls are redirected using the Out of Service Fallback Group setting. This setting can also be
manually controlled using the short code and button programming features Set Hunt Group Out of Service and Clear
Hunt Group Out of Service.
· or : In Service
When selected the hunt group is enabled. This is the default mode.
· Night Service
When selected, calls are redirected using the Night Service Fallback Group setting. This setting can also be
manually controlled using the short code and button programming features Set Hunt Group Night Service and Clear
Hunt Group Night Service.
369