User's Manual

Avaya Branch Gateway Manager 10.0 Page 32
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
2.8 Using the Details Pane
Whenever a selection is made through the group pane or the navigation toolbar, the settings for the matching record are
shown in the details pane. This pane is also used by Branch Gateway Manager in security mode to display records for
security settings.
The details are grouped into tabs. The tabs available may vary depending on what particular type of record is being
viewed. For example, for extension records the Analog tab is only shown for analog extensions.
Individual settings may also be grayed out. This indicates that they are either for information only or that they cannot be
used until another setting is enabled.
The top-left icon indicates the following:
Locked
Indicates that you can view the settings but cannot change them.
Editable
Indicates that you can change the settings if required.
Changed
Indicates that the settings have been changed since the tab was opened. Click OK to save the changes or Cancel to
undo.
Various icons may appear adjacent to settings:
Locked Setting
The setting cannot be changed through this tab. This icon appears on user settings where the user is associated
with User Rights that controls the setting.
Information
Indicates a value which does not have to be set but may be useful if set.
Warning
A warning indicates a configuration setting value that is not typical and may indicate misconfiguration.
Error
An error indicates a configuration setting value that is not supported by the system. Such settings may cause the
system to not operate as expected.
59