User's Manual

Avaya Branch Gateway Manager 10.0 Page 312
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.8.2 User List/Select Members
The hunt group Select Members form is used to add and remove users from the hunt group. For hunt group's with a
Ring Mode of Sequential or Rotary it is also used to set the order of use for the members of the hunt group.
The filters section at the top of the form can be used to filter the users shown.
To sort either table, click on the column header that should be used for the sort the table. Sort changes the order of
display only, it does not change the actual order of hunt group membership.
For Sequential and Rotary hunt groups, an Order column is shown. To change the order position of a hunt group
member, select the member and then use the up and down arrow buttons.
During the actions below, the Shift and Ctrl keys can be used as normal to select multiple users. Note that that the list of
members has been sorted, the sort is updated after adding or moving members.
· Add Before
Using the Shift and/or Ctrl keys, select the users you want to add and then on the right select the existing
member that you want to add them before.
· Add After
Using the Shift and/or Ctrl keys, select the users you want to add and then on the left select the existing
member after which you want them added.
· Append
Add the selected users on the left to the hunt group members on the right as the last member in the group
order.
· Remove
Remove the selected users on the right from the list of hunt group members.
·
Move the selected member on the right up or down the membership order of the group.