User's Manual

Avaya Branch Gateway Manager 10.0 Page 302
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
· If there are any calls alerting or in progress through the system to the twin the user status is shown
as alerting or in-use as appropriate. This includes the user showing as busy/in-use if they have such
a call on hold and they have Busy on Held enabled.
· If the user enables DND through Mobile Call Control or one-X Mobile client their status will show as
DND/busy.
· Calls from the system dialed direct to the users twinned destination rather than directed by twinning
from their primary extension will not change the user's status.
· one-X Mobile Client: Default = Off.
one-X Mobile Client is a software application that can be installed on Windows Mobile and Symbian mobile cell
phones. It allows the user to access a number of system features. For details see one-X Mobile Client .
· Mobile Call Control: Default = Off.
Mobile call control is only supported on digital trunks. It allows a user receiving a call on their twinned device to
access system dial tone and then perform dialing action including making calls and activating short codes. For
details see Mobile Call Control .
· Mobile Callback : Default = Off.
Mobile callback allows the user to call the system and then hang up. The system will then make a call to the
user's CLI and when answered, provide them with dial tone from the system to make calls.
709
705
708