User's Manual

Avaya Branch Gateway Manager 10.0 Page 297
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Settings: User
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Internal Twinning:
Select this option to enable internal twinning for a user. Internal Twinning cannot be selected for a user if they
already have Mobility Features selected.
· Twinned Handset: Default = Blank.
For internal twinning, the drop-down list can be used to select an available user as the twinned calls destination.
Users not displayed in the list are already twinned with another user. If the list is grayed out, the user is a
twinning destination and the primary to which they are twinned is displayed. The secondary phone must be on the
same system.
· Maximum Number of Calls: Default = 1.
If set to one, when either the primary or secondary phone are in use, any additional incoming call receives busy
treatment. If set to two, when either phone is in use, it receives call waiting indication for any second call. Any
further calls above two receive busy treatment.
· Twin Bridge Appearances: Default = Off.
By default only calls alerting on the primary phone's call appearance buttons also alert at the secondary. When this
option is enabled, calls alerting on a bridged appearance button at the primary can also alert at the secondary.
· Twin Coverage Appearances: Default = Off.
By default only calls alerting on the primary phone's call appearance buttons also alert at the secondary. When this
option is enabled, calls alerting on a coverage appearance button at the primary can also alert at the secondary.
· Twin Line Appearances: Default = Off.
By default only calls alerting on the primary phone's call appearance buttons also alert at the secondary. When this
option is enabled, calls alerting on a line appearance button at the primary can also alert at the secondary.