User's Manual

Avaya Branch Gateway Manager 10.0 Page 290
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
5.7.8 Dial In
Use this dialogue box to enable dial in access for a remote user. An Incoming Call Route and RAS service must also be
configured.
Usability
· Mergeable: These settings are mergeable. Changes to these settings do not require a reboot of the system.
Configuration Settings
· Dial In On: Default = Off
When enabled, dial in access into the system is available via this user.
· Dial In Time Profile: Default = <None>
Select the Time Profile applicable to this User account. A Time Profile can be used to set time restrictions on dial
in access via this User account. Dial In is allowed during the times set in the Time Profile form. If left blank, then there
are no restrictions.
· Dial In Firewall Profile: Default = <None>
Select the Firewall Profile to restrict access to the system via this User account. If blank, there are no Dial In
restrictions.
369
370