User's Manual

Avaya Branch Gateway Manager 10.0 Page 29
15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway
Configuration Mode: Toolbars
2.6 Using the Navigation Pane
This pane shows icons for the different types of record that the
configuration can contain. Each type is followed by the number of records
of that type already in the configuration. When Branch Gateway Manager is
used in security mode, this pane is also used by Branch Gateway Manager
in security mode to display records for security settings.
Selecting an icon displays the matching records in the group pane,
navigation toolbar and details pane. Note that Branch Gateway Manager is
used to configure different types of system. Therefore the icons shown may
vary depending on the type of system you are configuring. For descriptions
of the different icons refer to Configuration Settings .
The information in the pane also depends on whether the group pane is
visible or not. If the group pane is visible, the navigation pane just shows
icons for accessing which types of records should be shown in the group
pane. The group pane can then be used to select which of those records is
currently shown in the details pane. If the group pane is not visible, the
navigation pane shows icons for each type of records and under those icons
for each individual record. The navigation pane can then be used to select
which of those records is currently shown in the details pane.
Expanding/Collapsing the Navigation Tree
· Where or icons appear in the pane, they allow the structure to
be expanded or collapsed. When the group pane is hidden, and
icons are shown for each record type and allow the record type to be
expanded to display all the existing records of that type.
· The icon in the main toolbar can also be used to collapse all the
expanded record types shown in the navigation pane.
Moving the Border Between the Panes
The border between the visible panes can be adjusted. Note that this is a
proportional rather than exact position. If the whole window size is altered,
the border position may also move.
1.Place the cursor over the border between two panes.
2.When the cursor changes to a double headed arrow with a bar
through it, click and hold the cursor.
3.Drag the border to the required position and release the cursor.
Showing or Hiding the Navigation Pane
The navigation pane can be shown or hidden. To do this use either of the
following methods.
1.From the main toolbar, use the icon or select View. Those panes
currently shown are indicated by a tick mark.
2.To show or hide the navigation pane, click on its name.
Changing the Size of Configuration Icons
The size of the icons used on the navigation pane and details pane can be
adjusted.
1.Select File and then Preferences.
2.Select the Visual Preferences tab.
3.Select the required icon size from Small, Medium or Large.
4.Click OK.
135
59
135
30