User's Manual

Avaya Branch Gateway Manager 10.0 Page 284

15-601011 Issue 29r (Friday, November 02, 2012)B5800 Branch Gateway

· Force Login: Default = Off

If checked, the user must log in using their Login Code to use any extension including an extension to which they are

the default associated user (Base Extension). For example, if Force Login is ticked for user A and user B has logged

onto A's phone, when B logs off user A is not automatically associated with their normal phone and instead must log

back on. If Force Login was not ticked, A would be automatically logged back in.

· Force Account Code: Default = Off

If checked, the user must enter a valid account code to make an external call.

· Outgoing Call Bar: Default = Off

When enabled, this setting stops a user from making any external calls except those that use dial emergency features.

On many Avaya display phones, this causes a B to be displayed. The following features can be used with outgoing call

bar: Outgoing Call Bar On , Outgoing Call Bar Off and Change Login Code .

· Inhibit Off-Switch Forward/Transfers: Default = Off.

When enabled, this setting stops the user from transferring or forwarding calls externally. This does not stop another

user transferring the restricted users calls off-switch on their behalf. Note that a number of other controls may inhibit

the transfer operation, see Off-Switch Transfer Restriction .

· Can Intrude: Default = Off

Check this option if the user can join or interrupt other user's calls using call intrusion methods other than

conferencing.

· Cannot be Intruded: Default = On

If checked, this user's calls cannot be interrupted or acquired by other internal users using call intrusion . For users

with Cannot Be Intruded off, private call can be used to indicate whether a call can be intrude or not.

· Can Trace Calls: Default = Off.

This settings controls whether the user is able to make used of ISDN MCID controls.

· Can Accept Collect Calls: Default = Off [Brazil Only]

Determines whether the user is able to receive and accept collect calls.

· Deny Auto Intercom Calls: Default = Off. Release 6.x.

When enabled, any automatic intercom calls to the user's extension are automatically turned into normal calls.

485 485 450

758

731

734

743